Chimney Repair &
Restoration Services
From cracked crowns and failing flashing to complete chimney rebuilds — we diagnose the root cause and fix it properly. No guesswork. Free estimates on all repairs.
NCSG Certified
National Chimney Sweep Guild
Repair Services
- Crown & cap repair or replacement
- Tuckpointing & masonry repair
- Flashing repair & waterproofing
- Damper repair or replacement
- Full chimney rebuilds
All Chimney Repair Services
We handle every type of chimney and masonry repair — from minor repointing to complete rebuilds.
Chimney Leak Repair
We diagnose the true source of chimney leaks — flashing, crown, mortar, or missing cap — and fix the underlying cause. Stop water damage before it becomes structural.
Learn moreMasonry Repair & Tuckpointing
Puget Sound's freeze-thaw cycles eat away mortar joints year after year. We remove deteriorated mortar and replace it with matched material — restoring both structure and appearance.
Learn moreChimney Flashing Repair
Failed flashing where the chimney meets the roof is the most common cause of attic leaks. We reseal or fully replace flashing using quality materials for a watertight connection.
Learn moreChimney Crown Repair
A cracked chimney crown lets water directly into the masonry below. We seal hairline cracks with waterproof membrane or rebuild deteriorated crowns entirely.
Learn moreChimney Cap Installation
An uncapped chimney invites rain, animals, and debris. We install single-flue, multi-flue, and custom-fit stainless steel caps with built-in spark arrestors.
Learn moreChimney Relining
A damaged liner can't safely contain combustion gases. We install stainless steel and insulated liner systems sized to match your specific appliance — restoring safe venting.
Learn morePartial & Full Chimney Rebuilds
When damage is too widespread for targeted repair, we rebuild — partial reconstruction above the roofline or full rebuild with matched masonry. Only when genuinely needed.
Learn moreDon't Ignore These Warning Signs
Chimney damage almost always starts small and gets expensive fast. Homeowners across Puget Sound who spot these early save thousands.
- White staining (efflorescence) on exterior brick — a sign water is already inside
- Crumbling, cracked, or missing mortar between bricks
- Water stains on ceilings or walls near the fireplace
- A damaged, cracked, or missing chimney crown
- Rust stains inside the firebox or on the damper
- Bricks that are spalling (cracking or flaking on the face)
- Smoke backing up into the room when the fireplace is in use
- A leaning chimney or visible gap at the roofline
Why Act Now?
Small cracks → major leaks
A hairline crack in a crown or mortar joint costs a few hundred dollars to fix. The same crack after one wet Puget Sound winter can require full crown replacement, interior repairs, and mold remediation.
Water damage compounds
Once water gets into masonry, it migrates through walls, into attic framing, and down to the firebox. The repair bill grows every season you wait.
Safety risks are real
A cracked flue liner allows carbon monoxide, heat, and sparks into your home. This isn't a cosmetic issue — it's a fire and CO hazard that needs to be addressed promptly.
The Genesis Difference
We diagnose, not just quote
We inspect your full chimney system before recommending any repair. You'll understand exactly what's wrong, why it happened, and what it'll cost — before we touch a thing.
Repair what needs repairing
We won't upsell a rebuild when tuckpointing is the right fix. Our technicians are paid on quality, not commission — so you get honest recommendations every time.
We match your existing masonry
Color-matched mortar and brick sourcing means repairs blend in, not stand out. Your chimney looks restored, not patched.
Puget Sound expertise
We've worked through hundreds of wet Puget Sound winters. We know how our region's rain and freeze-thaw cycles attack masonry — and we repair it to withstand what's coming next.
Licensed, bonded, insured
Every technician is background-checked and licensed in Washington State. Our work is fully insured and backed by a 100% satisfaction guarantee.
What to Expect
Every repair follows the same transparent, clean process.
Inspect
We assess the full chimney system — interior, exterior, crown, flashing, firebox — and document every issue found.
Report & Quote
You receive a plain-English written estimate. Every repair is itemized. No pressure, no mystery pricing.
Repair
We complete the work with drop cloths and cleanup. Materials are matched to your existing masonry throughout.
Walk-Through
We show you exactly what was done, explain why, and provide a maintenance recommendation going forward.
Chimney Repair FAQs
Chimney Repair Near You
Local chimney repair throughout the Puget Sound region — select your city for service details and availability.
Related Services
See our chimney repair cost guide for Seattle for typical pricing ranges and what affects your estimate.
Last reviewed: May 2026